The third issue of vol.9 for the Kufa Engineering Journal (KUJ) was (released).
The dean of the faculty of Engineering, Dr. Al-Athari state that the (KUJ) is scientific journal which published from engineering faculty at University of Kufa, this journal was established to (spread) new knowledge and technology in engineering field. all scientific articles in the journal –which belong to inside and outside Iraq– is yielded to high scientific assessment and publishing and documentation rules.
Both, editor in chief Prof. Muhammed Abbas and managing editor Assist Prof. Ababs Talib said that the engineering journal published a high standard scientific papers in a range of engineering fields like; civil, electrical, mechanical, telecommunication… etc.
They pointed that our main next goal is to make this journal Scopus indexed
Finally they declare that all members in the staff of the journal are ready to publish the next issue (which means that this volume will have four issues for the first time)
It is worthy to mention that this issue include a fifteen high standard scientific papers, all these papers were subject to all international scientific specifications, and they are listed as below:
Authors name | Title | No |
Rusul N. Mohammed | Removal of fluoride from shatt Al-Arab drinking water using a novel low cost material | 1 |
Israa F. Yousif and Ali H. Ataiwi | Construction of Slurry Jet Erosion Tester and The Effect of Particle Size on Slurry Erosion | 2 |
Mohammed H. Shamsa, Basil S. Al-Shathr and Tareq S. Al-Attar | EFFECT OF POZOOLANIC MATERIALS ON COMPRESSIVE STRENGTH OF GEOPOLYMER CONCRETE | 3 |
Abbas S. Shareef and Ali A. Dibs | Numerical and Experimental Study of Heat Transfer Enhancement for Different Basefluids Using Al2O3 on F.P.S.C under Solar Simulation | 4 |
Ahmed A. Kadhem, Mujid H. Enad, and Ali S. Yasir | STUDY THE EFFECT OF STEEL WIRES PRE-TENSION ON THE BENDING AND ADHESION PROPERTIES OF BEAD PLY IN RUBBER TIRES | 5 |
Fadhel A. Hassan | Mathematical Modeling OF Hydrological Parameters EFFECT on Probable Maximum Precipitation for Al-Najaf Al-Ashraf City | 6 |
Saleh I. Khassaf and Ali H. Al Rammahi | ESTIMATION OF SLOPE LENGTH FACTOR (L) AND SLOPE STEEPNESS FACTOR (S) OF RUSLE EQUATION IN THE EUPHRATES RIVER WATERSHED BY GIS MODELING | 7 |
Sohaib K. Al-Mamoori, Laheab A. Al-Maliki, Hussain M. Hussain and Mohammed J. Al-Ali | Geotechnical Mapping for Some Chemical Properties of An-Najaf Province Using GIS | 8 |
Shurooq Mahdi Ali and Emad Ali Al-Helaly | SUM-SINES EQUATION FOR ESTIMATING THE PERCENT OF SHADOW LENGTH OF TARGETS IN THE SATELLITE IMAGES | 9 |
Huda A. Al-Mayahi | NUMERICALSTUDY OF MIXED CONVECTION FLOWIN ALID | 10 |
Ali T. Jasim and Maryam A. Ali | EFFECT OF HYDROSTATIC WATER PRESSURE ON PERFORMANCE OF SELF-COMPACTING CONCRETE PLACED UNDERWATER | 11 |
Mohammed Y. Hassan1 and Saif F. Abulhail | FPGA based p/pi/pd/pid-like interval type -2 flc design for control systems | 12 |
Rizgar S. Amin | FLEXURAL CAPACITY FOR RC BEAMS WITH EXPOSED REINFORCEMENT | 13 |
Ala’a A. Mahdi, Mohammed W. Khadim and Ammar A. Mohammed Hassn | A COMPUTATIONAL and EXPERIMENTAL INVESTIGATION of AIR FLOW and CONTAMINANTS CONCENTRATION in A LABORATORY WITH MIXING VENTILATION SYSTEM | 14 |
Wasan I. Khalil and Thaer A. Al-Daebal | ENGINEERING PROPERTIES OF SUSTAINABLE SELF-COMPACTING CONCRETE WITH CLAY BRICKS WASTE AGGREGATE | 15 |